Epoxy Resin Laminated Fiber Glass Pultruded

Epoxy Resin Laminated Fiber Glass Pultruded Rod

 I. Define and purpose
Glass fiber is mainly made of SiO2, MgO2, Na2O, CaO, etc. According to the amount of alkali, it can be classified into three kinds: non-alkali glass fiber, mid-alkali glass fiber and high-alkali glass fiber. It is mainly used as insulation material, wet-proof material and noise reduction material.
II. Technical requirement for surface
The surface of laminated rod should be flat and smooth, no bubble, no wrinkle, no delamination or crackle, and properly free from other defects such as scrape, impress, dirty spot and uneven color, but a little color patches is allowed.
Ⅲ. Characteristics
The Glass Fiber Rod is commonly used. It is very stiff and strong with low water absorption and flame retardant. What’s more, it has other advantages, such as extremely durable, good dimensional stability, good heat resistance, good mechanical properties and so on.
VI. Application
Solid glass fiber rods have thousands of industrial, commercial and recreational uses. Because they are not electrically conductive, they are a great material for antennas. Glass fiber rods are frequently used as a strengthening core in applications where conductivity is an issue, as standoffs and for kite framework. In addition, glass fiber rods are used as flexible framing for outdoor structures such as tents and small greenhouses. They are inexpensive, offer a high strength-to-weight ratio, flexible and extremely durable. read more

0
Read More
Insulation Dog Bone

Insulation Dog Bone For Transformer

Epoxy/Polyester Resin Pultruded Profile
This product is made of non-alkali glass fiber yarn impregnated with unsaturated polyester resin by the traction force and finally pultruded and solidified in hot mold. It is mainly used as insulation components of electrical equipment. The product can be rectangular, I-shaped, angular, T-shaped, groove-shaped, tubular and cylindrical, etc. read more

0
Read More
Htg Fiberglass Sleeve

Htg Fiberglass Sleeve

After using the alkali-free glass fiber woven tube, the special resin is bonded by high temperature dewaxing and fixing. The heat resistance can reach 400-600℃. It has the characteristics of tensile resistance and high temperature resistance. read more

0
Read More
Acrylic Glass Fiber Sleeve

Acrylic Glass Fiber Sleeve

It is a kind of insulating sleeve made of alkali-free glass fiber woven tube coated with acrylate and then heated and dried.

It has good dielectric properties, flexibility and elasticity, and can be used for wiring insulation and mechanical protection of motors, electrical appliances, meters, radios and other devices. read more

0
Read More
PVC Glassfiber Sleeve

PVC Glassfiber Sleeve

It is a kind of insulating sleeve made of alkali-free glass fiber woven tube coated with pvc resin and then heated and plasticized.

It has excellent softness and elasticity, good dielectric and chemical resistance, good mechanical strength, suitable for electric motor, circuit, instrument, instrument and household electrical equipment wiring and mechanical protection. read more

0
Read More

High Density Polyethylene Sheets

High Density Polyethylene Sheets. Chinese name: Polyethylene plate. PE sheet is a high crystallinity, non-polar thermoplastic resin. The original HDPE has a milky white appearance and a semi-transparent shape in a thin section.

PE sheet product features:
1. The wear resistance of high molecular weight polyethylene board is the first in plastics, and the higher the molecular weight, the higher the wear resistance and impact resistance of the material;
2. The impact strength of ultra-high molecular polyethylene sheets is the highest value among existing plastics, and there is still a relatively high impact strength even at -70 ° C;
3. Self-lubricating;
4. Ultra-high molecular weight polyethylene has extremely low water absorption. Therefore, its physical and mechanical properties are independent of the humidity factor in the operating conditions used;
5. Ultra-high molecular weight polyethylene is chemically stable, and can resist corrosion of various corrosive media and organic solvents such as acid, alkali and salt at a certain temperature and concentration range;
6. Ultra-high molecular weight polyethylene is odorless, non-toxic, odorless, non-corrosive, physiologically circulatory and physiologically adaptable. read more

0
Read More

Crepe paper for transformers

Crepe paper for transformers is made by wrinkling of electrical insulation paper. There are crepe along its lateral direction, and the crepe are pulled apart when stretched. Crepe paper with different elongation can be produced due to different wrinkle processing procedures. The thickness of the insulating paper is generally 0.05 mm to 0.12 mm, and the elongation is in the range of 5% to 200%. Insulating crepe paper is often used for the winding insulation of oil-immersed transformers, such as the winding ends, the insulation of the leads and the insulating screen. read more

0
Read More