Good surface properties of glass fiber pultruded profiles: When the composite material is in contact with chemical media, the surface is generally less corrosive and less fouling. Therefore, it is commonly used to manufacture fluid pipes with low resistance inside the pipe and low friction coefficient. Save a lot of power. Because composite materials are generally not as susceptible to metal ion-contaminated media as metals, this is why polycarbonate products are widely used in the food and pharmaceutical industries. In addition, the composite material has a very high friction (pv) limit value, and its water friction coefficient is small, about 0.01 to 0.03, so it is also a preferred material for wear-resistant products.
1. Corrosion resistance: It can resist the corrosion of gas-liquid medium such as acid and alkali, organic solvent and salt, and has incomparable superiority with other metals.
2, lightweight, high strength: staggered preparation and resin fully saturated with the overall structural strength of the hard polyvinyl chloride 10 times. 3, flame retardant, impact resistance, aging resistance.
4. Safety: Insulation, non-magnetic, non-slip, no spark, anti-fatigue,
5. Convenient installation: Due to the light weight of the fiberglass pultruded profile, the weight of the component is greatly reduced, thereby reducing the weight of the support structure, and the lifting device is not required for installation, which is economical and convenient.
ZTELEC seeks development with technology and survives with quality. Over the years, we have developed and produced a variety of glass fiber pultruded profiles with good quality and low price.