Zhengzhou City, Henan Province, China
banner
HOME » Electrical Materials » Ultrahigh voltage UHV products » Epoxy Resin Laminated Fiber Glass Pultruded Rod
Epoxy Resin Laminated Fiber Glass Pultruded

Epoxy Resin Laminated Fiber Glass Pultruded Rod

Density≥2.1g/cm3
Water Absorption<0.10% Tensile Strength≥1200Mpa Bending Strength≥900Mpa

 I. Define and purpose

Glass fiber is mainly made of SiO2, MgO2, Na2O, CaO, etc. According to the amount of alkali, it can be classified into three kinds: non-alkali glass fiber, mid-alkali glass fiber and high-alkali glass fiber. It is mainly used as insulation material, wet-proof material and noise reduction material.

II. Technical requirement for surface

The surface of laminated rod should be flat and smooth, no bubble, no wrinkle, no delamination or crackle, and properly free from other defects such as scrape, impress, dirty spot and uneven color, but a little color patches is allowed.

Ⅲ. Epoxy resin laminated fiber glass pultruded rod characteristics

The Glass Fiber Rod is commonly used. It is very stiff and strong with low water absorption and flame retardant. What’s more, it has other advantages, such as extremely durable, good dimensional stability, good heat resistance, good mechanical properties and so on.

VI. Epoxy resin laminated fiber glass pultruded rod application

Solid glass fiber rods have thousands of industrial, commercial and recreational uses. Because they are not electrically conductive, they are a great material for antennas. Glass fiber rods are frequently used as a strengthening core in applications where conductivity is an issue, as standoffs and for kite framework. In addition, glass fiber rods are used as flexible framing for outdoor structures such as tents and small greenhouses. They are inexpensive, offer a high strength-to-weight ratio, flexible and extremely durable.

Epoxy resin laminated fiber glass pultruded rod parameter

SpecificationItem

Density≥2.1g/cm3

Water Absorption<0.10%

Tensile Strength≥1200Mpa

Bending Strength≥900Mpa

Compressive Strength(axial)≥680Mpa

Water Diffusion Test 1min12KV

Leakage Current<1mA

Dye PenetrationPass after 15mins

Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.

Ztelec Group